Transform Your Toyota Corolla Cross: A Guide to Installing LED Fog Lights

Upgrading the lighting system in your Toyota Corolla Cross can significantly enhance both visibility and style. In this blog, we will guide you through the installation process of LED lights, highlighting the benefits and features that make this upgrade a must-have for any Corolla Cross owner. Whether you're looking to enhance your nighttime driving experience or simply want to give your vehicle a modern touch, this guide will provide you with all the information you need for a successful installation. Let's dive in!

Why You Need to Upgrade Your LED Lights

The original lights or fog lights on the market typically offer only around 5 watts of power, which can limit visibility and overall performance. In contrast, our LED lights deliver an impressive 30 watts, providing significantly brighter illumination. This increase in power not only enhances your ability to see the road clearly, especially in low-light conditions, but also improves your visibility to other drivers, increasing safety on the road. By making this switch, you ensure a more effective lighting solution that meets the demands of modern driving.

How to Install Fog Lights

Our Replacement Kit Include:

• Fog Light Frames (Left, Right)
• LED Fog Light Fixtures (Left, Right)
• Wiring Kit (include Fuse / Relay)
• Light Switch Button
• (Optional Purchase) TF-1 Fog Light Bulb

Necessary Tools and Materials

• Fog light kit
• Screwdriver set
• Wrench set
  
• Electrical tape

【Step1】Assemble the light fixtures

Tighten the screws to secure.Notice: there is a left and right.

【Step2】Remove the engine splash shield（forward）

【Step3】Remove the original lamp cover and Install the Fog Light module

There are 3 screws need to remove.

Installing fog Light...

【Step4】Pull the wires through the firewall

Route the wires together with the original wiring above the hot water pipe.

【Step5】Install the Fog Lights switch and the wiring

【Step6】Route and conect wiring

Route the wiring through the engine compartment.

Connect the main power line to the battery.

Tidy up the wiring.

【Step7】Adjust the angle of the fog light beams

And there you have it! You’ll be amazed at the difference between the two types of bulbs. We wish you a wonderful DIY experience!

If you enjoyed our tutorial, please share it!

>>Watch the video with more detail! (English Sub)

Learn more about our LED